Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across San Leandro
Most driveway gate installations in San Leandro run between $3,200 and $7,800 depending on gate type, access to power, and whether existing posts or pilasters need resetting. Our crews are dispatched locally from the Bay Area office and typically schedule a free measure within 48 hours for San Leandro properties. Call (510) 726-7050 and a live person will pick up, day or night.
We’ve worked on gates throughout San Leandro’s westside flatlands, from Washington Manor to the Halcyon tracts to the commercial corridors near Davis Street and the BART stations. The soil, the salt fog, and the age of the housing stock here create installation challenges you won’t find in inland East Bay cities. Our Gate Installation team documents every post reading, every hinge placement, and every operator setting in writing before we leave.
Why Vance Gate Repair Concord Is San Leandro’s Preferred Gate Installation Company
San Leandro homeowners tend to research hard before calling. They’ve already read the three-star reviews mentioning callbacks for sagging gates and rusted operators that failed within two seasons. We don’t blame them for being cautious.
Since 2014, Vance Gate Repair has completed more than 22,000 gate repairs and installations. Every single job started with a written price and ended with a documented photo record. In San Leandro specifically, that documentation habit matters more than most places, because Bay-mud soil movement and salt corrosion mean the same gate can look fine in March and be dragging by November. Our 365-Day Done Right Promise gives us a full year to make any adjustment right at no additional charge. No expiration within that window. No argument.
A live person answers our phone 24 hours a day, seven days a week. When you call (510) 726-7050, you reach a human who can dispatch a technician, confirm your appointment window, and send you the technician’s name and photo before arrival. No voicemail loops. No “we’ll call you back between 8 and 12.”
We also offer a free second opinion on any written estimate from another company. Bring the paperwork. We’ll review it at no cost and tell you straight whether the scope and price match what your gate actually needs.
Our Gate Installation Services in San Leandro

Swing Gate Installation
Swing gates remain the most common type we install in San Leandro’s residential neighborhoods, particularly the 1950s-1970s tract homes throughout Washington Manor. The challenge here isn’t the gate panel. It’s the post or pilaster it hangs from. Concrete block pilasters built on Bay mud in that era lean forward into the driveway opening over decades of seasonal soil movement. We see this constantly. The wrought iron itself is sound. The hinge post is out of plumb. Sag correction alone won’t hold because the footing is the problem. Our swing gate installs in San Leandro typically include a post-footing assessment, and we quote the reset separately so you know exactly what you’re paying for before any concrete gets poured.

Driveway Gate Installation
San Leandro driveway gates need to clear sloped approaches, accommodate tight setbacks common to mid-century lots, and handle the marine layer that rolls in off the Bay. We measure the driveway grade, check power access, and specify whether a single swing, double swing, or sliding configuration makes sense for your specific opening. On westside properties near the Marina, we specify corrosion-resistant hinges and hardware from day one. Standard ferrous hardware rusts faster here than in Castro Valley or Livermore. It’s not a matter of if. It’s a matter of how many seasons.

Double Gate Installation
Double swing gates are common on wider San Leandro driveways, especially in the larger westside lots. The field vignette we keep returning to: a Washington Manor homeowner with a 1960s double swing gate that dragged and wouldn’t latch. The wrought iron was sound. The block pilaster had pitched forward on Bay mud. We reset the post footing, stabilized the pilaster, then hung two new corrosion-resistant swing gate leaves and set the LiftMaster operator so the loop detector and safety photocell cleared the sloped driveway. The gate held its reveal through two wet seasons of soil movement. That’s the standard we apply to every double gate install in San Leandro. We don’t hang new gates on drifting posts.

Sliding Gate Installation
Sliding gates make sense for San Leandro commercial lots near Davis Street and the BART stations where space is tight and security requirements are higher. These installs require a level track bed, proper setback from the property line, and an operator rated for the gate’s weight and cycle count. We specify heavy-duty chain-link or aluminum frame gates for industrial applications, with electric rolling operators from DoorKing or Elite depending on the access-control integration required. Every commercial sliding gate install includes a written scope covering the power run, safety edges, and loop detector placement.

Pedestrian Gate Installation
Pedestrian gates in San Leandro’s residential neighborhoods often match existing driveway gates in style and material. We fabricate and install wrought iron, aluminum, and steel pedestrian gates with self-closing hinges and latch sets rated for coastal exposure. On westside properties, we specify stainless steel or powder-coated hardware to resist the salt-fog corrosion that destroys standard latches within a few seasons.

Security Gate Installation
Security gates for San Leandro commercial properties and multi-family buildings integrate with access control systems, intercoms, and keycard readers. We install electric rolling gates, slide gates, and barrier arm systems with operators from LiftMaster, DoorKing, and Elite, documenting every wire run and device address under Haven Standard Clause 4.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in San Leandro
We work on nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For San Leandro customers, this means we can service whatever motor is already on your property rather than steering you toward a replacement that doesn’t match your access-control setup. We stock common LiftMaster and Elite operator parts locally, which keeps turnaround short when a motor fails or a control board needs swapping. If your gate has an obsolete pre-UL 325 operator, we’ll tell you straight whether it can be retrofitted with modern safety devices or whether replacement is the cheaper long-term answer.
Common Gate Installation Problems We See in San Leandro Homes

- Bay-mud pilaster drift in Washington Manor. Concrete block gate pilasters built in the 1950s on alluvial fill soils lean forward into the driveway opening over decades. The hinge post goes out of plumb. The gate sags. No hinge adjustment fixes this permanently. The footing needs reset or stabilization first.
- Salt-fog corrosion on westside hardware. San Leandro’s direct Bay exposure delivers heavier marine layer than cities even a few miles inland. Ferrous hinges, latches, and operator motor housings corrode noticeably faster. We specify corrosion-resistant upgrades on every westside install.
- Obsolete control boards without entrapment protection. 1970s-era gates often have pre-UL 325 operators with no working photo-eyes or edge sensors. Mounting modern safety devices on a drifting post is futile. The footing gets fixed first, then the safety system gets installed properly.
- Sloped driveways limiting gate swing geometry. Many San Leandro lots have driveways that pitch toward the street. A swing gate that clears the slope on level ground may drag at the low corner. We measure grade precisely and specify gate leaf dimensions or a slide-gate conversion where needed.
Pricing for Gate Installation in San Leandro, CA
Here is what gate installation costs in the San Leandro market based on the jobs we’ve priced and completed:
| Gate Type | Typical Range in San Leandro | What Affects Price |
|---|---|---|
| Single swing gate (new install, existing post sound) | $3,200 - $4,800 | Gate material, operator brand, power run distance |
| Double swing gate (new install, existing posts sound) | $4,500 - $6,800 | Gate width, operator count, access control integration |
| Sliding gate (residential) | $5,200 - $7,800 | Track length, gate weight, operator capacity |
| Post or pilaster reset / stabilization | $1,800 - $3,400 | Footing depth, soil condition, concrete removal |
| Operator replacement on existing gate | $1,400 - $2,600 | Brand, horsepower, safety device count |
| Corrosion-resistant hardware upgrade | $380 - $720 | Hinge count, latch type, material specification |
These ranges reflect San Leandro’s specific conditions: the post-work often required on westside properties, the corrosion-resistant hardware we specify for Marina-adjacent exposure, and the power-run distances common to mid-century lot layouts. Every price is written and handed over before any work starts. No surprise invoice at the end. That’s Haven Standard Clause 1.
Call (510) 726-7050 for a free measure and written estimate. We bring a level, a post-hole probe, and a camera. You’ll see what we see.
We Also Serve Cities Near San Leandro

Our crews work throughout the East Bay and beyond San Leandro itself. We regularly install and service gates in Oakland, Alameda, Walnut Creek, and Berkeley. Dispatch and scheduling are coordinated from our Bay Area office, with technicians routed to minimize travel time to your property.
Serving San Leandro, CA - Our Local Coverage Area
We’re based in the San Leandro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in San Leandro

No, the gate panel is often salvageable. In Washington Manor and the Halcyon tracts, the concrete block pilaster typically leans forward into the driveway opening on Bay mud, taking the hinge post out of plumb. We reset the post footing and stabilize the pilaster, then rehang the existing gate or new corrosion-resistant leaves. The iron isn’t the problem. The footing is. Call (510) 726-7050 and we’ll probe the post base to confirm.
Sometimes, but only after the post footing is verified plumb and stable. Obsolete pre-UL 325 operators lack entrapment protection, and mounting modern photo-eyes or edge sensors on a drifting post is wasted work. We assess the post, quote the footing work if needed, then specify an operator with proper safety devices that will actually function long-term. The written price covers everything required, not just the motor swap. Call (510) 726-7050 for a free assessment.
San Leandro’s direct frontage on San Francisco Bay, anchored by the San Leandro Marina, delivers consistently heavier salt-laden marine layer fog than inland East Bay cities. Ferrous hinges, latches, and operator motor housings corrode at measurably faster rates. We specify stainless steel or powder-coated hardware on every westside install because standard steel fails prematurely in this exposure. Call (510) 726-7050 and we’ll show you the difference in hardware specifications.
A level track bed, proper setback from the property line, and an operator rated for the gate’s weight and expected cycle count. Commercial lots in this corridor typically need heavy-duty aluminum or chain-link frames with electric rolling operators from DoorKing or Elite, integrated with access control. We include the power run, safety edges, and loop detector placement in the written scope. Every install is documented with wiring diagrams and photos under Haven Standard Clause 4. Call (510) 726-7050 to schedule a site measure.
Rarely. The pilaster can often be stabilized or the post footing reset without disturbing the fence line. We see this exact scenario constantly in San Leandro’s westside neighborhoods. The block structure leans, but the fence panels and gate itself may be sound. We quote the post work separately from any gate replacement so you can choose the right scope for your budget. The written price before work starts lets you compare options without pressure. Call (510) 726-7050 for a free evaluation.
Written by Adrian Vance, Owner at Vance Gate Repair, serving residential and commercial gate customers throughout the San Francisco Bay Area since 2014.





Before
After
Before
After