Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Antioch
A new gate installation in Antioch typically runs $2,800-$7,500 for a residential driveway system, depending on whether you’re adding automation to an existing manual gate or starting from bare ground. Most Antioch installations we measure are scheduled within 48 hours, with a written quote delivered before any work begins. Call (510) 726-7050 for a free measure and written estimate.
We serve Antioch from our San Francisco Bay Area dispatch office, with crews running daily to neighborhoods along Deer Valley Road, Lone Tree Way, and throughout the Black Diamond and Hillcrest areas. Our Gate Installation team knows the local housing stock: the late-1980s through early-2000s tract communities that dominate eastern Antioch were built with ornamental tubular steel or wrought iron fencing, and many of those original swing and slide systems are now due for replacement or proper automation. The clay soils, delta winds, and summer heat here punish gates differently than they do closer to the Bay. That local context changes how we size operators, set posts, and run conduit.
Why Vance Gate Repair Concord Is Antioch’s Preferred Gate Installation Company
We’ve installed and replaced gates across Antioch’s master-planned communities since 2014, and the pattern is unmistakable. The same builder-grade operators fail street to street because they were installed in the same 15-year construction wave. When we quote a replacement, we name the part number, show you the photo of the failed component, and give you the written price before anyone touches a tool. That’s Haven Standard Clause 1.
Our 365-Day Done Right Promise covers every installation: if anything isn’t right, we make it right at no charge within that window. No expiration inside the year, no argument. Antioch customers also receive Clause 4 documentation - a photographed record of every post footing depth, operator setting, and safety-device position - so the next technician (whether it’s us or someone else ten years from now) knows exactly what was installed and how it was configured.
A live person answers our phones 24 hours a day. No voicemail loop, no callback queue. If you’re measuring options for a new gate off Hillcrest Avenue or comparing quotes for a Deer Valley Road HOA, we’ll review any written estimate from another company at no cost. Bring the paperwork.
Our Gate Installation Services in Antioch
Driveway Gate Installation
Most Antioch driveway gates we install are replacements for manual gates that were never automated during the original build. The power and conduit runs that should have gone in during construction usually didn’t. We handle the trenching, the 110V or low-voltage run, and the concrete work for operator pads - or we can install a solar-compatible system if trenching across your driveway isn’t practical. A typical automated driveway gate installation in Antioch runs $3,200-$6,800 for a single swing or slide system, including operator, safety devices, and basic access control.
Swing Gate Installation
Swing gates dominate Antioch’s older HOA communities, but they’re also the most sensitive to post movement. The Altamont clay beneath much of the city heaves in winter rains and shrinks in summer heat, and a hinge post that was plumb in March may be two degrees out by September. We set our posts deeper than the original builders typically did, use expanded footings where the soil report indicates, and always verify plumb before hanging the gate. If you’re replacing an existing swing gate, we check the pillar first. Installing a new operator on a shifted post burns out the motor within a season.
Sliding Gate Installation
Sliding gates make sense on Antioch’s narrower lots and steep driveways where a swing arc would block the street or the garage. Cantilever systems (where the gate suspends from rollers without a ground track) handle the delta wind better than tracked systems - the 20-30 mph afternoon gusts that blow through the eastern corridor can jam a track with dust and debris. We size the rollers and the operator for wind load, not just gate weight. A cantilever sliding gate installation in Antioch typically runs $4,500-$7,500 depending on travel length and whether we’re adding a keypad or telephone entry system.
Pedestrian Gate Installation
Pedestrian gates in Antioch’s HOA communities are often the afterthought - a manual walk-through added to the fence line without matching the driveway gate’s style or access control. We install pedestrian gates that integrate with the main system: magnetic locks tied to the same keypad, or standalone proximity readers for pool areas and side yards. Matching the ornamental iron or tubular steel to the existing fence is standard. Pricing for a pedestrian gate with basic latch hardware starts around $1,800-$2,800; add $400-$800 for magnetic lock integration.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Antioch
We install and service nine major automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - and we don’t steer Antioch customers toward any single manufacturer. If your HOA spec requires a particular operator for warranty consistency, we match it. If you’re starting fresh, we recommend based on cycle volume, wind exposure, and whether you need telephone entry or simple remote control. We stock common FAAC and BFT control boards and gearboxes locally for faster turnaround on Antioch’s aging cohort of European-spec operators, and we carry LiftMaster residential and commercial lines for same-day replacement of failed units.
Common Gate Installation Problems We See in Antioch Homes
- Builder-grade operators failing in clusters. The gated communities along Deer Valley Road and Lone Tree Way were built with the same operator models installed in the same five-year windows. When one fails, three more on the block are close behind. We source obsolete parts from specialty suppliers, but often the better value is a modern replacement sized for actual cycle load.
- Post movement masquerading as operator failure. The Altamont clay shifts seasonally, and a gate that “just stopped closing” often has a hinge post that walked out of plumb. We correct the footing or shim the pillar before installing new electronics. Fixing the motor without fixing the post is a wasted install.
- Missing power and conduit from original construction. Most Antioch homes built before 2005 have manual driveway gates with no electrical rough-in. Adding automation means trenching, conduit, and sometimes a dedicated circuit. We handle the full scope, including permit coordination if the job crosses into the sidewalk or street.
- Undersized operators for delta wind load. A gate operator rated for a 16-foot single swing in calm conditions will struggle in Antioch’s 20-30 mph afternoon gusts. We size for wind load plus safety margin, which often means stepping up one operator class from the manufacturer’s base recommendation.
Pricing for Gate Installation in Antioch, CA
| Service | Typical Range in Antioch |
|---|---|
| Single swing gate, manual (no operator) | $2,800-$4,200 |
| Single swing gate with automation | $3,800-$6,200 |
| Double swing gate with automation | $5,200-$8,500 |
| Sliding gate (cantilever, with operator) | $4,500-$7,500 |
| Pedestrian gate with magnetic lock | $2,200-$3,600 |
| Power/conduit run (trenching, new circuit) | $800-$2,400 |
| Telephone entry or keypad system | $1,200-$2,800 |
These ranges reflect Antioch’s market for materials and labor in 2024-2025. What moves the needle: gate material (ornamental iron vs. aluminum vs. steel), travel length for sliding systems, whether we’re adding automation to an existing manual gate or starting from bare ground, and the extent of electrical work needed. Every quote we deliver is written and agreed before work starts - no open-ended invoices, no “while we were here” add-ons. Call (510) 726-7050 for a free measure and exact written price.
We Also Serve Cities Near Antioch
Our crews run daily to Antioch and the surrounding communities: Pittsburg to the west, Brentwood to the south, Concord to the southwest, and Danville to the southeast. The same soil conditions, wind exposure, and housing-stock patterns apply across this corridor, and we carry the same documentation standards and written pricing to every job.
Serving Antioch, CA - Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Antioch
It’s often the post, not the motor. Antioch’s Altamont clay soils shift seasonally, and we’ve found hinge posts and concrete pilasters out of plumb on roughly half the “dead operator” calls we run in the Deer Valley Road and Black Diamond areas. The motor burns out trying to pull a misaligned gate to its limit. We check post plumb and hinge alignment before quoting any operator replacement. Call (510) 726-7050 and we’ll diagnose it on-site - estimates are free.
Yes, and it’s one of the most common jobs we do in Antioch’s 1980s-2000s tract homes. The original manual gate is usually structurally sound, but it needs a power run, safety devices, and often a reinforcement bracket for the operator arm. We trench conduit, add the photocell and edge sensor, and install an operator sized for the gate’s actual weight plus wind load. A typical conversion runs $3,200-$5,800 depending on electrical distance and access control options.
Those communities were built in a concentrated wave between roughly 1988 and 2003, with the same operator models installed by the same builders. After 20-30 years of Antioch’s heat, dust, and delta wind, that entire cohort is hitting its replacement window simultaneously. It’s not random wear - it’s infrastructure aging on a predictable curve. We keep common obsolete parts in stock, but many HOAs are choosing coordinated replacement programs to standardize on a single current brand.
Yes, every automated gate we install includes UL 325-compliant entrapment protection: photocells (infrared beams across the opening), edge sensors on the leading edge, and proper force-limiting settings on the operator. This is non-negotiable under California building code and our own standards. We photograph every safety device position and include the settings in your documented job record under Haven Standard Clause 4.
It will if the installer ignores it. Antioch’s 20-30 mph afternoon gusts put lateral load on swing gate hinges and cantilever rollers that inland Bay Area cities don’t see. We size operators for wind load, use heavier-duty roller trucks on sliding systems, and set hinge posts with expanded footings where wind exposure is highest. A gate that cycles fine in calm morning air can bind or fault by 4 p.m. if the hardware wasn’t specified for actual conditions.
Ready for a written quote? Call (510) 726-7050. We’ll measure your opening, check your post footings and power availability, and deliver a flat written price before any work starts. Estimates are free, and we review competitor quotes at no cost - just bring the paperwork.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Antioch since 2014.